fOR HAMMER ACTION ONLY fORGED STEEL SEPARATE SCUTCH INSERTS fOR HAMMER ACTION ONLY fORGEDSTEELWITHCARbIDEINSERT COPPER bRAzED INSERT bOND 30MM, 55MM AND 20MM CHANNELLINGDP-SDS-CC30 / 55 / 20-EXT fORGED STEEL - HAMMER ACTION MACHINED HEAD DESCRIPTION ; Channelling Chisels - quickly produce channels for cable runs etc. Dust doesn’t become airborne as tends to be in chunks. Can be used in conjunction with a wall chasing machine. USE ME FOR ; Medium density block and soft brick. Options for standard conduit (30mm) / capping runs (55mm) and channelling behind skirting with long neck version (20mm). Use in conjunction with an SDS Plus machine with roto-stop. RAKING DP-SDS-RC30 / 55 DESCRIPTION ; Carbide Tipped Raking Chisels - for general masonry work in hard materials e.g channel chasing in engineering bricks. Carbide tipped for long life. 30mm and 55mm options with flat - narrowed ends. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. Use in conjunction with an SDS Plus machine with roto-stop. SCUTCH COMB DP-SDS-SC / SC-HOLDER DESCRIPTION ; Scutch Comb Chisel - Allows scutching operations using SDS plus machines instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with ‘droves.’ USE ME FOR ; All types of masonry - dressing, chasing etc. Multi purpose tool, extremely versatile. Use in conjunction with an SDS Plus machine with roto-stop. SDS plus chisels 85 MASONRYANDCONCRETE ALWAYS GREASE SDS PLUS SHANkS bEfORE AND DURING USE. THIS WILL REDUCE HEAT bUILD UP AND REDUCE WEAR ON THE MACHINE AND THE CHISEL ITSELf. bEfORE USING ANY SDS PLUS MACHINE - CHECk THAT IT HAS A HAMMER ACTION ONLY MODE AND ENSURE THIS IS ENGAGED bEfORE USING THE CHISEL. DO NOT USE ON A MACHINE THAT DOES NOT HAVE THIS OPTION. CHANNELLING CHISELS (DP-SDS-CC30/55/20) CAN bE RESHARPENED If THEY bECOME bLUNT. USE A GRINDER OR A GOOD QUALITY fILE. RAkING CHISELS ARE DESIGNED TO HAVE A SHORTER LENGTH IN ORDER TO TRANSMIT AS MUCH POWER AS POSSIbLE. fOR SCUTCH COMb HOLDERS - kEEP SCUTCH COMb TEETH (OR DROVES) IN CONTACT WITH THE MATERIAL AT ALL TIMES TO STOP THE COMb bEING LEVERED OUT Of THE COMb HOLDER. MORTAR RAkING, TILE REMOVING AND CHANNELLING CHISELS INCORPORATE CRANkED SHAfTS TO ENSURE THAT THE MACHINE IS ANGLED AWAY fROM THE MATERIAL bEING WORkED ON. SDS PLUS CHISELS USER HINTS & TIPS 1 2 3 4 5 6