Strong cutting action makes it extremely effective! ̈ Laser-welded segment joining for the highest loads ̈ 10 mm coating height for a long service life ̈ Pre-tensioned steel core and active diagonal guard for maximum safety Super-thin cuts in all kinds of ceramic and natural stone! ̈ Extremely thin discs (1.2-1.4 mm) for very fine cuts and minimal dust ̈ Cuts through material quickly thanks to narrow toothing ̈ Smooth cutting edge for extremely clean cut edges ̈ Easy to use in the dry technique Sand-lime brick Gas concrete/YTONG Fired tiles Granite Marble Natural stone Wall tiles Rock-solid and sturdy in tiles and natural stone! ̈ Thin-walled discs (1.2-2.0 mm) for extra fine cuts and clean cut edges ̈ Simple cutting in an instant ̈ Effective air cooling via numerous slits in the cutting disc ̈ Holes in blade for cooling, even without water Sizes: Diameter 300.0 mm - 350.0 mm Sizes: Diameter 115.0 mm - 350.0 mm Sizes: Diameter 115.0 mm - 125.0 mm Asphalt Concrete Clinker Sand-lime brick Gas concrete/YTONG Fired tiles Granite Marble Natural stone Wall tiles Roof tiles Concrete Clinker Brickwork Fired tiles Wall tiles 3874 ExtremeCut Asphalt DIAMOND PRODUCTS DIAMOND PRODUCTS 3875 ExtremeCut Ceramic DIAMOND PRODUCTS 3876 TurboCut Ceramic DIAMOND PRODUCTS 3876 EcoCut Ceramic 16 Cost-effective cutting of a large number of tiles! ̈ Low dust thanks to thin cutting width ̈ Easy to use in the dry technique Sizes: Diameter 115.0 mm - 350.0 mm